Maxwell Lisovsky is an amateur racing driver with 30 recorded laps across 8 vehicles on LapMeta, averaging 3.75 laps per car. Lisovsky is known in the BMW E36 community for track day participation and automotive enthusiasm, representing dedicated enthusiasts who appreciate the E36 3 Series for balanced chassis dynamics, aftermarket support, and affordable performance platform accessibility.
His LapMeta data shows testing with 10 laps West and 7 laps East 3 Mile w/ Bypass. The 8-vehicle portfolio with nearly four laps per car enables meaningful comparative assessment while likely maintaining E36 platform focus. BMW E36 enthusiasts often demonstrate deep technical knowledge of chassis setup, suspension geometry, and driving techniques optimizing rear-wheel-drive dynamics. With 30 laps across 8 vehicles, Maxwell Lisovsky exemplifies the platform-dedicated enthusiast who combines BMW appreciation with systematic track development.
- 300/650/18 Yokohama A005 Non-DOT slicks at 20PSI cold, 30 hot
- 320WHP, 250WTQ built bottom end stock compression S54 mated to ZF-5 with CAE shifter
- 2650LB weight with driver and half tank
- MCS 2 way remote coilovers, true rear coil setup 700LB front, 425LB rear
- Ground Control Race sway bars front and rear (front full soft, rear 1.5 holes from soft)
- Ground Control Bumpsteer adjustable tie rods
- SPL RTAB bearings
- SPL rear camber arms
- Bimmerworld solid aluminum differential and subframe inserts
- M3 rear end conversion
- OS Giken 1.5 Way drop in LSD
- TC Design front roll center correction kit with e36 m3 control arms
- Ground Control lollipop bearings
- Woodward steering column kit
- AP racing Radi-Cal 6 piston CP9668 Kit with Hawk DTC-70 pads
- Porsche 4 piston rear calipers with GLOC R16 Pads
- Apex Wheels VS5RS 18x11 Forged
- Solid aluminum condor speed shop engine and transmission mounts
- CSF Radiator and Moroso expansion tank
- Color Fittings Slim-line Oil cooler kit
- MA-Shaw PTG body kit
- Custom 3 inch front alumalite splitter (ST4 size)
- Bimmerworld Carbon GT wing @3 deg aoa
- Full cage with subframe integration by Kontrolle Engineering